SPONSORED LINKS

1996 GMC Sierra truck wont start

Tiny
LIKEWISE
  • MEMBER
  • 1996 GMC SIERRA
  • 4.3L
  • V6
  • 4WD
  • AUTOMATIC
  • 23,000 MILES
Truck would be hard to start sometimes. Had a new fuel pump installed. It continued to do the same thing. Now it wont start at all. Its not getting fuel. If I spray starting fluid in the intake it will run until the starting fluid is gone. Fuel pump relay has also been replaced.
SPONSORED LINKS
Saturday, August 1st, 2015 AT 8:25 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
First thing is to pull relay out and jump it with a jumper wire and see if you get fuel pressure you shold get at least 60 psi at fuel rail. That will test your wiring and pump. If you jump from the slots shown in arrow will tell you if pump is good. However in lower part of pic is a fuel pump balance module which along with pcm turns on the pump so you may need to scan that to test it.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, August 1st, 2015 AT 10:27 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links