What is wrong with the heater?

1996 GMC SAFARI
185,000 MILES
Avatar
DAVID88888888
  • MEMBER
  • 2 POSTS
96 gmc safari - warm air will not blow into passenger compartment - have replaced thermostat and vacuum line - heater core and blower are working properly
Jan 14, 2012 at 5:52 PM
Advertisement
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
sounds like blend door is not working right.
Jan 14, 2012 at 6:03 PM
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Inspect the air blend/mode/recirc doors/actuators/vacuum hoses-also check the HVAC control module
Jan 14, 2012 at 6:04 PM
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
are hoses on firewall at core hot?
Jan 14, 2012 at 6:26 PM
Avatar
DAVID88888888
  • MEMBER
  • 2 POSTS
Yes, the hoses are hot.
Jan 14, 2012 at 6:39 PM
Avatar
MIKE H R
  • MEMBER
  • 3,094 POSTS
heater core could be blocked. disconnect the lines and backflush. If that is the cause do it a few times to get it really cleaned out and the water comes out clear.
Jan 14, 2012 at 10:24 PM
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
dont sound like core is plugged.
Jan 15, 2012 at 2:59 AM
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
look for a electric temp control motor undr lower right side of dash on hvac case.
Jan 15, 2012 at 6:15 AM
Avatar
MIKE H R
  • MEMBER
  • 3,094 POSTS
with heater core eliminated then continue to follow fixitmr on checking the electric control motor.
Jan 15, 2012 at 4:22 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.