1996 Geo Metro low compression, how do I fix

1996 GEO METRO
100,600 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
I have low compression on two consecutive cylinders. I had a compression test done to discover this. How do I replace the head gasket and valves that are causing the low compression? Thank you.
Jan 13, 2011 at 8:19 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
You may have the means to remove the cylinder head, but the valve work requires machining as dose the cylinder head as well. If you intended to do this job, you would be best advised to purchase a work shop manual and study the relevant section. Check that you have the require skill level and understanding of what has to be done. Also, you may find that there are tools that you don't have which are critical to the job. Get a manual and go from there.
Jan 13, 2011 at 8:21 PM