SPONSORED LINKS

1996 Geo Metro low compression, how do I fix

Tiny
2CP-ARCHIVES
  • MEMBER
  • 1996 GEO METRO
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 100,600 MILES
I have low compression on two consecutive cylinders. I had a compression test done to discover this. How do I replace the head gasket and valves that are causing the low compression? Thank you.
Thursday, January 13th, 2011 AT 8:19 PM

1 Reply

Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
You may have the means to remove the cylinder head, but the valve work requires machining as dose the cylinder head as well. If you intended to do this job, you would be best advised to purchase a work shop manual and study the relevant section. Check that you have the require skill level and understanding of what has to be done. Also, you may find that there are tools that you don't have which are critical to the job. Get a manual and go from there.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 8:21 PM

Please login or register to post a reply.

Related Engine Compression Content

Engine Compression Test
VIDEO
Engine Compression Test
Instructional repair video
Compression Test
GUIDE
Compression Test
A compression test is a valuable diagnostic procedure that helps determine the health of an engine by measuring the pressure generated in each cylinder. The following is a...
VIEW MORE

Sponsored links