SPONSORED LINKS

Help to replace fuel pump

Tiny
WILLE1899
  • MEMBER
  • 1996 FORD WINDSTAR
  • 6 CYL
I have a 96 ford windstard GL v6, 3.8. I need to know how to replace the fuel pump. Thanks a lot.
Friday, May 27th, 2011 AT 6:30 PM

2 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Drain the fuel pressure from fuel lines. Drain the fuel tank, Disconnect all lines, electrical-- fuel--evap-- filler tube from tank. Safely raise and support the vehicle.

You can use a floor-jack to support fuel tank, not vehicle. Take the straps loose and drop tank, get the tank out from under the vehicle. There is a locking ring you will have to take loose, to get the pump out of tank.

Install is reverse of removal. There are safety issues working under a vehicle. Safety is your responsibility.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, May 27th, 2011 AT 7:27 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Hope this helps, a little.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Friday, May 27th, 2011 AT 9:59 PM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links