SPONSORED LINKS

No current at crankshaft sensor connector

Tiny
FRED THOMAS
  • MEMBER
  • 1996 FORD WINDSTAR
  • 170,000 MILES
No current from pcm to crankshaft sensor connector
Wednesday, January 11th, 2012 AT 3:01 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
What engine? They are wired different
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, January 11th, 2012 AT 3:11 PM
Tiny
FRED THOMAS
  • MEMBER
  • 3 POSTS
!996 windstar 3.8
Was this
answer
helpful?
Yes
No
Wednesday, January 11th, 2012 AT 3:16 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ok you'll have to check the connectin at the pcm to see if ther eis continuity between the crank sensor an dpcm, you could have a bad wire or connection. It's pin number 21 and 22 on the pcm. Also check the ground for the pcm at the left front of engine compartment and right rearof engine compartment. You will need a vom for this not a test light.
Was this
answer
helpful?
Yes
No
Wednesday, January 11th, 2012 AT 3:25 PM

Please login or register to post a reply.

Related Crankshaft Sensor Content

Crank Angle Sensor Replacement Mercedes Benz
VIDEO
Crank Angle Sensor Replacement Mercedes Benz
Instructional repair video
Crankshaft Sensor
GUIDE
Crankshaft Sensor
A crankshaft position sensor (CKS) is used to reference crankshaft rotation as the engine is running while supplying feedback data to the main computer. This sensor is...
VIEW MORE

Sponsored links