My wipers do not work

LEVILINTON

MEMBER
1996 FORD THUNDERBIRD
30,000 MILES

My wipers do not work due to a broken piece inside the lever. How can I find an assembly layout of this lever and get the best home remedy to fix this?

Wednesday, January 2nd, 2013 AT 12:21 AM

2 Replies

CJ MEDEVAC

MECHANIC
11,005 POSTS

This look like what you need?

Check the vehicle information or enter it in yourself. i guessed that you had a 3.8L probably does not matter for this part anyway.

Http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_combination-switch-bwd_3990001-p?searchterm=wiper%2fwasher+switch

This next information may help you and your buddies now and in the future.

Http://www.2carpros.com/questions/2001-dodge-neon-milage-just-want-put-fliuds-their-locations

Even after you click on them, the screenshots are sort of small you may be able to "magnify" them by upping your screen more than 100%.

Any questions about this just ask.

I hope this aids you.

Keep us informed on progress.

The medic

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Wednesday, January 2nd, 2013 AT 5:09 AM

JOHNNY178

MEMBER
2 POSTS
1987 FORD THUNDERBIRD

V8 two wheel drive automatic

The windshield wipers are not working.

The relay/fuse appears to be good.

The wiper washer works, but the windshield wipers don't come on.

I changed the wiper switch that is part of the steering column.

I removed the wiper motor and cannot find any power to the socket that connects to the wiper motor.

I bought a new wiper motor and connected it to socket without installing the motor. I made sure I grounded the motor to a good ground contact and the motor did not work. I tried a few different motors the same way.

In the box that the motor came in, there was instruction papers. It said that it could be the wiper governor.

The motor fits many models so I do not know if my car has a wiper governor.
If it does, where can I locate the wiper governor and how to I test it to see if it is the problem?

Thanks

Was this

answer

helpful?

Yes

No

Saturday, December 31st, 2016 AT 4:40 PM (Merged)