1) Has worked fine
2) Not cold now
3) Put on manifold gauge set
4) Static pressure (not running) 85 psi in both high and low side
5) Turn on motor and AC. Clutch engages on compressor.
6) High side rises to about 150 PSI
7) PROBLEM Low side pressure doesn't drop. It increases to 100 PSI.
8) Is it most likely a bad compressor ? Or ?
2) Not cold now
3) Put on manifold gauge set
4) Static pressure (not running) 85 psi in both high and low side
5) Turn on motor and AC. Clutch engages on compressor.
6) High side rises to about 150 PSI
7) PROBLEM Low side pressure doesn't drop. It increases to 100 PSI.
8) Is it most likely a bad compressor ? Or ?
Jul 22, 2015 at 6:08 AM
