Car repair

Tiny
LOU19817
  • MEMBER
  • 1996 FORD CROWN VICTORIA
  • 5 CYL
  • 156,000 MILES
How do you change a fuel injector on a crown vic 1996
Tuesday, January 25th, 2011 AT 7:07 AM

1 Reply

Tiny
WAY2OLD
  • MECHANIC
  • 195 POSTS
You need to remove the fuel pressure on the rail. Then remove the fuel rail bolts so you can pull the rail up. Some injectors will stay in the engine and some will come out with the rail. Remove the faulty injector. Replace with some light lubrication on the O rings so they will seal. Press the rail firmly down on the injectors to seat them into the intake. Install bolts in fuel rail. Turn key on a couple of times and check for leaks.
Was this
answer
helpful?
Yes
No
Wednesday, January 26th, 2011 AT 12:55 AM

Please login or register to post a reply.

Sponsored links