cooling system

160,000 MILES • 2WD • AUTOMATIC
Avatar
JACKHAMMOND
  • MEMBER
  • 1 POST
engine heats to 240 before backing down and maintaining 220. The heat comes and goes.
Jan 27, 2011 at 6:59 AM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,414 POSTS
If it cycles up and down like that a few times before settling down, there needs to be a very small bleed hole drilled in the thermostat. That will let the coolant that is hot "over there" by the temperature sensor migrate to the thermostat "over here" so it will open up sooner. This symptom started on my '88 Grand Caravan many years after it was replaced. Drilling a 1/16 inch hole solved the problem. It's been in there over ten years now, and working fine. The original thermostat had that bleed hole in it already. The question was why did the new one work okay for a few years without it?

caradiodoc
Jan 27, 2011 at 1:41 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle