Fuel pump location. Nothing in tank. 4afe
Nov 8, 2018 at 3:54 PM
Fuel pump location
1996 TOYOTA COROLLA
SHERBZ
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi and thanks for using 2CarPros.com
It should be in the tank attached to the sending unit. Here are the directions specific to your vehicle. The directions are for the 96 sedan 4A-FE engine.
_________________________
1996 Toyota Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE)
Fuel Pump Removal and Installation
Vehicle Powertrain Management Fuel Delivery and Air Induction Fuel Pump Service and Repair Procedures Fuel Pump Removal and Installation
FUEL PUMP REMOVAL AND INSTALLATION
COMPONENTS FOR REMOVAL AND INSTALLATION
FUEL PUMP REMOVAL
CAUTION: Do not smoke or work near an open flame when working on the fuel pump.
1. REMOVE REAR SEAT CUSHION
2. REMOVE FLOOR SERVICE HOLE COVER
- Remove the 4 screws and service hole cover.
- Disconnect the fuel pump & sender gauge connector.
INSTALLATION HINT: Check for fuel leakage.
3. DISCONNECT FUEL PIPE AND HOSE FROM FUEL PUMP BRACKET
CAUTION: Remove the fuel filter cap to prevent the fuel from flowing out.
- Using SST, disconnect the outlet pipe from the pump bracket.
SST 09631-22020
Torque: 30 N.m (310 kgf.cm, 22 ft.)
- Disconnect the return hose from the pump bracket.
4. REMOVE FUEL PUMP BRACKET ASSEMBLY FROM FUEL TANK
- Remove the 8 bolts.
Torque: 3.4 N.m (35 kgf.cm, 30 in.lbf)
- Pull out the pump bracket assembly.
- Remove the gasket from the pump bracket.
INSTALLATION HINT: Install a new gasket to the pump bracket.
FUEL PUMP INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
__________________________
The directions are the same if your vehicle is a wagon.
Let me know what you find.
Joe
It should be in the tank attached to the sending unit. Here are the directions specific to your vehicle. The directions are for the 96 sedan 4A-FE engine.
_________________________
1996 Toyota Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE)
Fuel Pump Removal and Installation
Vehicle Powertrain Management Fuel Delivery and Air Induction Fuel Pump Service and Repair Procedures Fuel Pump Removal and Installation
FUEL PUMP REMOVAL AND INSTALLATION
COMPONENTS FOR REMOVAL AND INSTALLATION
FUEL PUMP REMOVAL
CAUTION: Do not smoke or work near an open flame when working on the fuel pump.
1. REMOVE REAR SEAT CUSHION
2. REMOVE FLOOR SERVICE HOLE COVER
- Remove the 4 screws and service hole cover.
- Disconnect the fuel pump & sender gauge connector.
INSTALLATION HINT: Check for fuel leakage.
3. DISCONNECT FUEL PIPE AND HOSE FROM FUEL PUMP BRACKET
CAUTION: Remove the fuel filter cap to prevent the fuel from flowing out.
- Using SST, disconnect the outlet pipe from the pump bracket.
SST 09631-22020
Torque: 30 N.m (310 kgf.cm, 22 ft.)
- Disconnect the return hose from the pump bracket.
4. REMOVE FUEL PUMP BRACKET ASSEMBLY FROM FUEL TANK
- Remove the 8 bolts.
Torque: 3.4 N.m (35 kgf.cm, 30 in.lbf)
- Pull out the pump bracket assembly.
- Remove the gasket from the pump bracket.
INSTALLATION HINT: Install a new gasket to the pump bracket.
FUEL PUMP INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
__________________________
The directions are the same if your vehicle is a wagon.
Let me know what you find.
Joe
Images (Click to enlarge)
Mar 2, 2021 at 9:26 AM
Advertisement
Hi, There are no hoses going under the service hole, neither is there a fuel pump located under the service hole. The car is a South African model.
Your assistance would be much appreciated.
Your assistance would be much appreciated.
Mar 2, 2021 at 9:26 AM
Hi again:
This is the only place I have ever seen one. I even checked an earlier years, and they are the same 1993 - 1998. The only thing I can suggest is to follow the fuel line from the tank. Someone may have placed an aftermarket inline pump on the car. It has to be attached to the fuel line.
Can you upload a picture of the service port so I can see what you have?
Let me know.
Joe
This is the only place I have ever seen one. I even checked an earlier years, and they are the same 1993 - 1998. The only thing I can suggest is to follow the fuel line from the tank. Someone may have placed an aftermarket inline pump on the car. It has to be attached to the fuel line.
Can you upload a picture of the service port so I can see what you have?
Let me know.
Joe
Mar 2, 2021 at 9:26 AM