temp gauge only goes up about an 1/8 of the way and the heater output is cool
Dec 7, 2011 at 9:25 PM
Advertisement
HMAC300
CERTIFIED EXPERT
48,601 POSTS
check to see if both heater hoses are hot when engine is warmed up. if not then replace thermostat. if it is hot then check the actuators in the hvac unit.
Dec 7, 2011 at 9:32 PM
HAWKLAN1701D
MEMBER
3 POSTS
Umm...the actuators?
Would that be the hot cold dial &/or the fresh/recirc dial?
If so they seem to be working fine, not sure how that would affect the temp guage though.
If both hoses are warm (not hot) does that still mean thermostat?
Dec 9, 2011 at 8:30 PM
Advertisement
HMAC300
CERTIFIED EXPERT
48,601 POSTS
probably does, they should behot to the touch onboth sides
Dec 9, 2011 at 9:37 PM
HAWKLAN1701D
MEMBER
3 POSTS
I'll have to check when i get home tonight.
Thanks.