1996 Chevy Silverado With A 305 Fuel System Nightmare

Tiny
TYZ4INFINITY
  • MEMBER
  • 1996 CHEVROLET SILVERADO
  • 280,000 MILES
Replaced the fuel pump, fuel filter, fuel pressure relay, fuel pressure sensor, central sequential fuel injection system (spider injection system) & all related gaskets, coil, spark plugs, distributor ignition rotor, planium intake cover on my 1996 Chevy truck with a 305 and it still will only stay running by pouring gas into the throttle body but will die as soon as I stop pouring fuel into the throttle body. I have good fuel pressure (around 66-75 psi) up to the fuel metering block. WTH else can it be? GAWD!
Wednesday, July 24th, 2013 AT 12:01 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Scan for codes because if the throttle body doesn't 't see an ignition signal it won't put power to injectors also check fuses underhoodespecially ecm fuses and ign fuses. Then check cam and crank sensors for resistance if to high it may be the problem we have no specs on those however.
Was this
answer
helpful?
Yes
No
Wednesday, July 24th, 2013 AT 12:43 PM

Please login or register to post a reply.

Sponsored links