describe your problem...i have negative camber on the front passanger tire. whats the possible repair options
Dec 2, 2010 at 3:29 PM
1996 chevy s10
1996 CHEVROLET S-10
GMAN7723
- MEMBER
- 1 POST
Advertisement
CARADIODOC
- ✓ASE Certified Mechanic
- 34,321 POSTS
Replace the worn upper ball joint and have it aligned. These trucks eat ball joints. It's fairly common to need to replace them every 50,000 miles.
If camber can not be corrected with the regular adjustments, look at the steering axis inclination readings. There is no correct value. They must be very nearly the same on both sides. If they are different, suspect a bent spindle.
caradiodoc
If camber can not be corrected with the regular adjustments, look at the steering axis inclination readings. There is no correct value. They must be very nearly the same on both sides. If they are different, suspect a bent spindle.
caradiodoc
Dec 2, 2010 at 4:01 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.