I have 2 codes for P1441

Tiny
AJRACEREX
  • MEMBER
  • 1996 CHEVROLET MONTE CARLO
  • 197,000 MILES
I own a 1996 Monte Carlo and I just got an engine light today. I went to the shop and got the code reading and it turned out to be two P1441 codes. There wasn't much info the technician was able to give me so I did a little research myself. Turns out to be an evap purge valve. I honestly don't know what this is nor do I know where to find it. Please help?
Tuesday, February 21st, 2012 AT 5:31 PM

5 Replies

Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
You ask about repairing or replacing the purge valve because that name is in the code description. There are a lot of things that will set a purge code. Something as simple as a loose gas cap or a hole in a vacuum line could set that code.
Was this
answer
helpful?
Yes
No
+1
Tuesday, February 21st, 2012 AT 5:36 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
The purge valve solenoid is part of the evaporative emission control system located On top right of engine, on intake plenum
Was this
answer
helpful?
Yes
No
+1
Tuesday, February 21st, 2012 AT 5:38 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Check canister in back by gas tank on drivers side for any bad hoses.
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 5:49 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Have it smoke tested
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 6:04 PM
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
This not a life/car threatening issue. You can ignore it if you want?
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 9:43 PM

Please login or register to post a reply.

Sponsored links