How do i replace the Serpentine Belt before it completely breaks off??

222,876 MILES
Avatar
DMS1008
  • MEMBER
  • 16 POSTS
How to replace a Serpentine belt on '96 Acura 2.5TL? Pretty positive its the serpentine. Last night when i turned on my A/C and defrost i heard a squealing. the belt has been frayed for a while now its almost gone. The belt is literally down to like 1/4 of inch in width if not less.
Sep 19, 2012 at 6:42 AM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
There are 3 belts and each with their own tightening and adjusting bolts.
Loosen the adjusting bolt holding bolt/nut and pull on the belt to release the tension of the belt to remove it. Installation is reversal of procedures. You start with the outermost power steering belt an move on to the A/c belt and then the alternator belt.

Ensure the crank pulley is not wavy, indicating a badd harmonic damper and crank pulley needs to be replaced if that is the case.

Sep 19, 2012 at 7:30 AM
Avatar
DMS1008
  • MEMBER
  • 16 POSTS
Took me 6 hours but i finally replaced the A/c belt and power steering as well. thanks!
Sep 19, 2012 at 5:47 PM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
You're welcome.

For someone new on the job, to get it done is already an achievement.

Cheers.
Sep 19, 2012 at 11:22 PM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
New belts tends to stretch after a run in so you might need to readjust then tension one more time.
Sep 19, 2012 at 11:24 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle