ive all ready removed it from near the trany but cant get it out of the peddle
Feb 2, 2012 at 8:27 PM
how to remove the clutch cable from the clutch peddle
1995 VOLKSWAGEN CABRIOLET
VWCABBY
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
the clip holds the cable in and shold be pushed then moved eitehr forward or backward to get cable off pedal assy.
Image (Click to enlarge)
Feb 2, 2012 at 8:42 PM
Advertisement
I know this is an old post....
The above image is for a "hydraulic" clutch operation/pedal... and does not apply to the question.
The cable is attached to the pedal via a slot fit. To make it easier to see, remove the instrument
cluster and have a look at the cable/pedal components from the top.
While reaching through the open cluster area, you should be able to manouver the cable out
of its seat in the pedal.... move the pedal at the same time to aid in removal & install.
Thomas
The above image is for a "hydraulic" clutch operation/pedal... and does not apply to the question.
The cable is attached to the pedal via a slot fit. To make it easier to see, remove the instrument
cluster and have a look at the cable/pedal components from the top.
While reaching through the open cluster area, you should be able to manouver the cable out
of its seat in the pedal.... move the pedal at the same time to aid in removal & install.
Thomas
Mar 12, 2012 at 3:54 AM