1995 Toyota Rav4 CV Joints

1995 TOYOTA RAV4
200,000 MILES
Avatar
PRAVESH
  • MEMBER
  • 2 POSTS
CV axle is sliding out of the transmission when i turn, which is causing it to bind up and break when i straighten out I know for a fact the retaining clip is on there, i thought with that there it would take an excessive amount of force to remove the axle from the transmission.
Oct 5, 2013 at 1:37 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
it does it has to be pryed out. if it keeps coming out either the retaining ring isn't in all the way or it's screwed up inside trans
Oct 5, 2013 at 1:42 PM
Advertisement
Avatar
PRAVESH
  • MEMBER
  • 2 POSTS
What could be the faults inside the transmission, can I replace the inside gears
Oct 5, 2013 at 1:53 PM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
the gears in pic would be damaged, which you need to tear apart transmission to ge t to it. but make sure that you try to put axle allthe way in you shold hear a click when it goes in.
Image (Click to enlarge)
Attached Media
Oct 5, 2013 at 2:06 PM