1995 Toyota 4runner Process Changing Water Pump Timing Belt On 95 4 Runner

1995 TOYOTA 4RUNNER
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
im in the process of changing the water pump and timing belt on a 95 toyota 4 runner 5speed 4x4 v-6. i have almost everything torn down to the crank shaft pulley now im stuck i cant get the bolt loose to remove the pulley i have the tools to pull the pulley if i could get the bolt off. Any ideas on how to keep the pulley in place so i can break the bolt free? i have 1 cyl. at TDC both cams and crank lined up and every thing ive tried to loosen that bolt doesnt work and the crank turns
Dec 15, 2012 at 6:28 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
air gun needs to break it loose. it is tightened to about 180 lbs.

the radiator may have to come out

Roy
Dec 15, 2012 at 6:48 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.