Lady in Distress..Impreza Coupe
brake drum shoes replacing w/new ones 1995 how?
brake drum shoes replacing w/new ones 1995 how?
Mar 13, 2011 at 7:11 PM
Lady in Distress need help
1995 SUBARU IMPREZA
BBDBBD
- MEMBER
- 1 POST
Advertisement
RASMATAZ
- ✓ASE Certified Mechanic
- 75,992 POSTS
Raise and support vehicle, then remove rear wheels.
Remove brake drum. If difficult to remove brake drum, remove adjusting hole cover from back plate, then turn adjusting screw until shoe separate from drum.
Remove hold-down pin and cup.
Disconnect lower shoe return spring from shoes.
Remove shoes one by one from back plate with adjuster.
Reverse procedure to install. Refer to Fig. 6 for tightening specifications.
Remove brake drum. If difficult to remove brake drum, remove adjusting hole cover from back plate, then turn adjusting screw until shoe separate from drum.
Remove hold-down pin and cup.
Disconnect lower shoe return spring from shoes.
Remove shoes one by one from back plate with adjuster.
Reverse procedure to install. Refer to Fig. 6 for tightening specifications.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Mar 13, 2011 at 7:16 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.