Dark black smoke heavy,
idles when I push in clutch while driving at 4 when I stop moving take clutch out it goes to 9
runs rough.
changed plugs, wires, fuel filter air filter, tps, module and the cap.
Thursday, September 4th, 2014 AT 4:02 PM
8 Replies
HMAC300
MECHANIC
48,601 POSTS
Scan for codes and check fuel pressure with a gauge. Auto parts rent it. Also clean throttle plate on both sides and iac hole with choke cleaner.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:07 PM
CHRONIC
MEMBER
5 POSTS
Code no response. Fuel preasure was 39.5 out of 42. Let out the gas from the tube and kept running. Ive cleaned the plate the best I could no change.
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:16 PM
HMAC300
MECHANIC
48,601 POSTS
Fuel pressure is 41-47 must meet minimum that is part of your problem. Make sure your tps switch is installed correctly. It has to move with throttle plate
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:20 PM
CHRONIC
MEMBER
5 POSTS
Aic ? Air intake control? Is that the one above my tps with the spring.
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:21 PM
HMAC300
MECHANIC
48,601 POSTS
Iac= idle air control it's on throttle body
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:23 PM
CHRONIC
MEMBER
5 POSTS
Ok what would cause the fuel preasure to drop. Or be low. Fuel pump?
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:38 PM
CHRONIC
MEMBER
5 POSTS
So on the iac is the the valve? Or the switch
Was this
answer
helpful?
Yes
No
Thursday, September 4th, 2014 AT 4:42 PM
HMAC300
MECHANIC
48,601 POSTS
Take this to a pro who will know what to do if your fuel pressure isn't high enough then it's the pump. Save your self aggravation and cost. I have no further comments