Tips on the proper procedure of removing the fuel injector of Mitsubishi Lancer GLI 1995 model to avoid leaks

Tiny
DOMINGO B. LEBOSADA
  • MEMBER
  • 1995 MITSUBISHI LANCER
  • 4 CYL
  • 2WD
  • MANUAL
  • 175,453 MILES
How to remove the fuel injector from the manifold and what are the sequence
Saturday, May 14th, 2011 AT 6:02 PM

2 Replies

Tiny
DOMINGO B. LEBOSADA
  • MEMBER
  • 2 POSTS
Pls. Send me tips on the proper procedures and identification accessories. Im pryaing your active support. Thank U
Was this
answer
helpful?
Yes
No
Saturday, May 14th, 2011 AT 6:08 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
FUEL RAILS & INJECTORS
WARNING:
Use a rag to cover fuel hose connection before disconnecting high pressure fuel hose at fuel rail. Some residual fuel pressure may still be in system.

Removal
Relieve fuel pressure. Disconnect negative battery cable. Disconnect PCV hose and breather hoses. Disconnect high pressure fuel hose at fuel rail. Disconnect fuel return hose and vacuum hoses. Disconnect injector electrical connectors. Remove fuel rail bolts, and lift fuel rail and injectors from engine. Injectors may be removed after fuel rail is removed from intake manifold.
Was this
answer
helpful?
Yes
No
+1
Wednesday, May 25th, 2011 AT 8:10 PM

Please login or register to post a reply.

Sponsored links