Transmission shifts good into all 5 forward gears the clutch seems to work good just won't go into reverse It was work fine then just quit working
Dec 26, 2011 at 5:12 AM
Transmission won't go into reverse
1995 MAZDA MX3
DAESTES
- MEMBER
- 1 POST
Advertisement
CJ MEDEVAC
- ✓ASE Certified Mechanic
- 11,004 POSTS
CHECK YOUR CLUTCH MASTER CYLINDER FLUID
IS IT LOW?
DO YOU FEEL ANY (OR MORE THAN NORMAL) FREEPLAY IN YOUR PEDAL AS YOU PUSH IT---BEFORE YOU FEEL RESISTANCE FROM THE CLUTCH?
MAY BE NEEDING TO BE BLED
IF THERE IS AN ADJUSTMENT, TAKE SOME SLOP OUT OF THE PEDAL LINKAGE--MAKING YOUR ENGAGEMENT HIGHER
THE MEDIC
IS IT LOW?
DO YOU FEEL ANY (OR MORE THAN NORMAL) FREEPLAY IN YOUR PEDAL AS YOU PUSH IT---BEFORE YOU FEEL RESISTANCE FROM THE CLUTCH?
MAY BE NEEDING TO BE BLED
IF THERE IS AN ADJUSTMENT, TAKE SOME SLOP OUT OF THE PEDAL LINKAGE--MAKING YOUR ENGAGEMENT HIGHER
THE MEDIC
Dec 26, 2011 at 5:20 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.