Transmission shifts good into all 5 forward gears the clutch seems to work good just won't go into reverse It was work fine then just quit working
Dec 26, 2011 at 5:12 AM
Transmission won't go into reverse
1995 MAZDA MX3
DAESTES
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
CHECK YOUR CLUTCH MASTER CYLINDER FLUID
IS IT LOW?
DO YOU FEEL ANY (OR MORE THAN NORMAL) FREEPLAY IN YOUR PEDAL AS YOU PUSH IT---BEFORE YOU FEEL RESISTANCE FROM THE CLUTCH?
MAY BE NEEDING TO BE BLED
IF THERE IS AN ADJUSTMENT, TAKE SOME SLOP OUT OF THE PEDAL LINKAGE--MAKING YOUR ENGAGEMENT HIGHER
THE MEDIC
IS IT LOW?
DO YOU FEEL ANY (OR MORE THAN NORMAL) FREEPLAY IN YOUR PEDAL AS YOU PUSH IT---BEFORE YOU FEEL RESISTANCE FROM THE CLUTCH?
MAY BE NEEDING TO BE BLED
IF THERE IS AN ADJUSTMENT, TAKE SOME SLOP OUT OF THE PEDAL LINKAGE--MAKING YOUR ENGAGEMENT HIGHER
THE MEDIC
Dec 26, 2011 at 5:20 AM
Advertisement