1995 Infiniti J30 J30 Turn On Heat Cool Cold Air Comes Out Saw Previous Post

1995 INFINITI J30
212,000 MILES
Avatar
ANISSART2
  • MEMBER
  • 6 POSTS
Have a 1995 Infiniti J30. When I turn on the heat, cool to cold air comes out. Saw in a previous post that the air-mix actuator should be checked to see if its in the a/c position. Where is this actuator? and is there anything else I should try?
Feb 23, 2013 at 6:54 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
checkyour fuses first and try removing hvac fuse for 60 seconds it may reset the actuator.
Feb 23, 2013 at 8:14 PM
Avatar
ANISSART2
  • MEMBER
  • 6 POSTS
where is the hvac fuse? is it under the hood or on the inside of the car by the emergency brake?
Feb 23, 2013 at 8:18 PM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
it's easy enough for you tolook you should have a manual that will point it out to you. it will be a 20-30 amp fuse maybe 2
Feb 23, 2013 at 8:42 PM
Avatar
ANISSART2
  • MEMBER
  • 6 POSTS
ok. ill find it. lost my manual so ill look under the hood in the fuse box location there and by the emergency brake in that fuse box location
Feb 23, 2013 at 9:00 PM
Avatar
ANISSART2
  • MEMBER
  • 6 POSTS
Ok, I tried looking at all the fuses by the brake and under the hood. There was no label for a HVAC fuse. Can anyone please tell me where the fuse is?
Feb 25, 2013 at 2:23 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
try fuses 10 & 11 under dash
Feb 25, 2013 at 12:54 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.