1995 GMC Sierra transmision auto

JACLE

MEMBER
1995 GMC SIERRA
V8
4WD
AUTOMATIC
89,000 MILES

My vehicle don't move when I set any mode ( D, R, 3, 2, 1 )

Monday, July 21st, 2014 AT 11:32 AM

3 Replies

HMAC300

MECHANIC
48,601 POSTS

Check trans fluid level if low or dark brown or black have a trans guy look at it. Migh tneed arebuild.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Monday, July 21st, 2014 AT 12:08 PM

JACLE

MEMBER
2 POSTS

HI, I've already rebuilt the transmission engine. When I check the fluid, the level is on top and even little more. However, we have removed the old transmission engine, there were two disc that seemed burned. How can I cheek if the transmission engine is on power or not. And is there a fuse who lead the transmission engine? What's it? And where is it?

My code vehicle : 1GTGK29F4SE540355

Was this

answer

helpful?

Yes

No

Tuesday, July 22nd, 2014 AT 1:26 AM

HMAC300

MECHANIC
48,601 POSTS

When you rebuilt it all discs should have been replaced along with seals and steel rings as well as checking the steel rings to bushings. If you didn't take the clutch pak pistons out you didn't replace the seals for them the only thing you can do now is to check on pressure taps and make sure you have them and that all the wires are incorrectly. The back wheels need to be on jack stands or a hoist to do this. I'd suggest you have a trans guy lookat it.

Was this

answer

helpful?

Yes

No

Tuesday, July 22nd, 2014 AT 5:25 AM