SPONSORED LINKS

How to replace rear brakes on my truck

Tiny
ROCJOC220
  • MEMBER
  • 1995 GMC C2500
  • 111,000 MILES
I was told that I have a full floating rearend. Can I effectively change my brakes without pulling the axel on both sides and what parts besides the brake shoes am I going to have to replace in the process?
Thursday, October 13th, 2011 AT 11:06 PM

2 Replies

Tiny
DAN_K
  • MECHANIC
  • 213 POSTS
Resurface or replace the rear drums if they don't meet minimum measurement. I would replace the brake hardware (springs and clips) while you're at it.

You do not need to remove the axles.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 13th, 2011 AT 11:09 PM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
REVISE MY SEARCH....FIND SOMETHING LIKE YOURS

HERE'S A GOOD EXAMPLE

http://www.youtube.com/watch?v=FOvSH-mLhRE

MAYBE IT WILL GIVE YOU CONFIDENCE

THE MEDIC
Was this
answer
helpful?
Yes
No
Friday, October 14th, 2011 AT 4:50 AM

Please login or register to post a reply.

Related Brake Shoe Content

Brake Shoe and Drum Replacement
VIDEO
Brake Shoe and Drum Replacement
Instructional repair video
Brake Shoe Symptoms
GUIDE
Brake Shoe Symptoms
Brake shoes are used on the rear of your vehicle and provide about 35% of the brake power when coming to stop and over time the brake shoes will wear out and can cause...

Sponsored links