1995 Geo Prizm Change Brakes Pads Bleed Lines Holding There Leak

1995 GEO PRIZM
205,650 MILES
Avatar
HUGHLOVE01YAHOOCOM
  • MEMBER
  • 3 POSTS
i change brakes pads and i bleed the lines and the brakes is not holding up there is no leak.
Nov 2, 2012 at 5:20 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,992 POSTS
If its going right straight to the floor-check the master cylinder could be leaking internally: https://www.2carpros.com/articles/brake-pedal-goes-to-the-floor
Nov 2, 2012 at 5:25 PM
Avatar
HUGHLOVE01YAHOOCOM
  • MEMBER
  • 3 POSTS
thanks for your information,with reguards to my brakes,but,i change the master cylinder and iam still getting the same problem,the brakes is very low.
Nov 3, 2012 at 4:46 PM
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,992 POSTS
Rear brakes are they drum if so open it up and inspect for wear and tear if any replace appropriate component and then adjust brakes shoes-
Nov 3, 2012 at 7:14 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.