SPONSORED LINKS

I change brakes pads and I bleed the lines and.

Tiny
HUGHLOVE01YAHOOCOM
  • MEMBER
  • 1995 GEO PRIZM
  • 205,650 MILES
I change brakes pads and I bleed the lines and the brakes is not holding up there is no leak.
Saturday, November 3rd, 2012 AT 12:20 AM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
If its going right straight to the floor-check the master cylinder could be leaking internally: https://www.2carpros.com/articles/brake-pedal-goes-to-the-floor
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, November 3rd, 2012 AT 12:25 AM
Tiny
HUGHLOVE01YAHOOCOM
  • MEMBER
  • 3 POSTS
Thanks for your information, with reguards to my brakes, but, I change the master cylinder and iam still getting the same problem, the brakes is very low.
Was this
answer
helpful?
Yes
No
Saturday, November 3rd, 2012 AT 11:46 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Rear brakes are they drum if so open it up and inspect for wear and tear if any replace appropriate component and then adjust brakes shoes-
Was this
answer
helpful?
Yes
No
Sunday, November 4th, 2012 AT 2:14 AM

Please login or register to post a reply.

Related Bleed - Flush Content

Bleed and Flush Your Brake System Correctly
VIDEO
Bleed and Flush Your Brake System Correctly
Instructional repair video
Brake System Flush
GUIDE
Brake System Flush
An automotive brake system flush is similar to a standard brake system bleed except for all of the brake fluid is flushed out of the brake system components such as the...
VIEW MORE

Sponsored links