Advertisement

1995 Ford Taurus

2WD • AUTOMATIC
Avatar
NEENEE93
  • MEMBER
  • 1 POST
1995 taurus fuel filter install
Feb 17, 2011 at 11:33 AM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
REMOVAL:
With engine OFF, relieve the fuel system pressure, refer to Service and Repair / Fuel Pressure Relief Procedure .
Remove the push connect fittings at both ends of the filter.
Remove fuel filter from bracket by loosening worm gear clamp. Note the direction of the "flow" arrow as installed in the bracket to ensure proper direction of fuel flow through replacement filter.


INSTALLATION:
Install fuel filter into the bracket, ensuring proper direction of flow.
Tighten worm gear clamp to 1.7-2.8 Nm (15-25 lb in) .
Install the push connect fittings onto the filter ends and install new retainer clips.
Cycle ignition switch from OFF to RUN position several times, without starting engine. Check for fuel leaks.
Mar 14, 2011 at 4:41 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle