Thursday, February 17th, 2011 AT 7:33 PM
NEENEE93
- MEMBER
- 1995 FORD TAURUS
- 2WD
- AUTOMATIC
1995 taurus fuel filter install
1995 Ford Taurus
1 Reply
RASMATAZ
- MECHANIC
- 75,992 POSTS
REMOVAL:
With engine OFF, relieve the fuel system pressure, refer to Service and Repair / Fuel Pressure Relief Procedure.
Remove the push connect fittings at both ends of the filter.
Remove fuel filter from bracket by loosening worm gear clamp. Note the direction of the "flow" arrow as installed in the bracket to ensure proper direction of fuel flow through replacement filter.
INSTALLATION:
Install fuel filter into the bracket, ensuring proper direction of flow.
Tighten worm gear clamp to 1.7-2.8 Nm (15-25 lb in).
Install the push connect fittings onto the filter ends and install new retainer clips.
Cycle ignition switch from OFF to RUN position several times, without starting engine. Check for fuel leaks.
With engine OFF, relieve the fuel system pressure, refer to Service and Repair / Fuel Pressure Relief Procedure.
Remove the push connect fittings at both ends of the filter.
Remove fuel filter from bracket by loosening worm gear clamp. Note the direction of the "flow" arrow as installed in the bracket to ensure proper direction of fuel flow through replacement filter.
INSTALLATION:
Install fuel filter into the bracket, ensuring proper direction of flow.
Tighten worm gear clamp to 1.7-2.8 Nm (15-25 lb in).
Install the push connect fittings onto the filter ends and install new retainer clips.
Cycle ignition switch from OFF to RUN position several times, without starting engine. Check for fuel leaks.
SPONSORED LINKS
Was this helpful?
Yes
No
+1
Monday, March 14th, 2011 AT 11:41 PM
Related Fuel System Fuel Filter Content
Fuel Filter Replacement Ford Mustang
Instructional repair video
Sponsored links
SPONSORED LINKS
Fuel Filter Mount Replacement Chevrolet
Fuel Filter Replacement Chevrolet
Fuel Filter Replacement Ford F-150 2004-2008
