The heater won't blow warm air,just installed new radiator and thermostat
Nov 12, 2014 at 3:20 PM
1995 Ford Ranger heater
RICKY DEAN
- MEMBER
- 1 POST
Advertisement
Was the problem there before or did it just start after the parts replacement? If it just started, suspect an air pocket in the heater core or under the thermostat. Check how hot the hoses get. They should be too hot to hold onto for very long. If the upper radiator hose gets hot, coolant is circulating past the thermostat so bleeding it isn't the cause. Check the coolant level. If it's still low, it won't circulate through the heater core.
If the heater hoses are hot, you have an actuator problem with the heater box. That was a real common problem with '97 models. I don't know if that goes as far back as on a '95.
If the heater hoses are hot, you have an actuator problem with the heater box. That was a real common problem with '97 models. I don't know if that goes as far back as on a '95.
Nov 12, 2014 at 3:32 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.