1995 Ranger

Tiny
ALASKABRAD
  • MEMBER
  • 1995 FORD RANGER
  • 6 CYL
  • 4WD
  • MANUAL
  • 83,000 MILES
Have 1995 ford ranger and I have obdII code reader in hand and code reads p1443 evaporative emission control system control valve. What part should I replace first, purge solenoid or vent solenoid?
Monday, December 27th, 2010 AT 5:05 AM

1 Reply

Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
Hello,

Here is the Code Def that has.

P01443 - Evaperative Emissions Control System = Vacuum System, Purge Control Solenoid or Purge Control Valve Malfunction.

Ok, first thing I would do is loosen gas cap and leave loose drive for day or 2.

Also look for Vacuum Leaks. Check all vacuum line for cracks and/or being soft make sure all connections are tight.

In most cases one or both situations above are the cause of the code. The gas cap because it has stopped venting properly.

Post results.

.
Was this
answer
helpful?
Yes
No
-2
Friday, February 4th, 2011 AT 2:28 AM

Please login or register to post a reply.

Sponsored links