f-350 auto tranny is leaking clean fluid

1995 FORD F-350
155,000 MILES
Avatar
95CHIQUITA
  • MEMBER
  • 3 POSTS
leaking out of the front inspection cover and the transfer case is overflowing. shifts fine when there's the proper fluid level. Filter pan cover is intact, no leaks there. Truck hasn't been worked hard, minimal towing. 4X4 diesel in Alaska. Probably multiple seals involved. Do tranny shops service just seals, or am I looking at a rebuilt unit, with this type of mileage? Thanks.
Oct 1, 2011 at 5:01 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
I don't think you need a new trans. Here is what I feel is the problem. Where the transmission and transfer case come together, there is a seal that seperates them. If that seal is bad, the trans fluid will go into the transfer case. That is why it is overfull. As the leak at the front, the front seal sounds like it is bad.

If the transmission is still shifting properly, it is fine. However, to access the rear seal, the transfer case has to come out and the front seal requires the transmission to be removed. You are looking at 20 dollars worth of parts + fluid replacement, and a lot of labor to remove the parts. If the transmission is still shifting properly, don't replace it.
Oct 1, 2011 at 5:06 AM
Avatar
95CHIQUITA
  • MEMBER
  • 3 POSTS
Very good, sure appreciate the quick and honest response- you guys rock! Tim
Oct 2, 2011 at 3:24 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Glad to help, Tim. Let me know if you have other questions.

Take care,
Joe
Oct 2, 2011 at 3:32 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.