I have a 1995 F-250 fwd with a 4

Tiny
MICHAELDOWNING
  • MEMBER
  • 1995 FORD F-250
  • 100,000 MILES
I have a 1995 f250 fwd with a 4.9L efii engine. It wont start unless you prime the motor via air intake. I have changed the fuel filter.
Thursday, February 7th, 2013 AT 2:49 AM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Scan for codes and check fuel pressure first
Was this
answer
helpful?
Yes
No
Thursday, February 7th, 2013 AT 2:50 PM
Tiny
MICHAELDOWNING
  • MEMBER
  • 2 POSTS
Thanks HMAC300 [expert] I figured thats what you would say I was hoping you knew a few magic words you could mumble over it and everything would be fixed. Oh well, guess I'll go to the auto parts store and buy me one of those "new fangled" gadgit sos I can check them-there codes you were talking about. Thanks again, I may be back in touch later. Respectfully yours, Mike downing
Was this
answer
helpful?
Yes
No
Thursday, February 7th, 2013 AT 6:40 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Make sure to se if you can rent a fuel pressure gauge becasue some codes are caused by low fuel pressure and as you have to prime through intake kinda sounds like it's low pressure pressure shold be 45-60 psi and ground the test lead at the point I have shown in pic.
Was this
answer
helpful?
Yes
No
Thursday, February 7th, 2013 AT 8:01 PM

Please login or register to post a reply.

Sponsored links