broken belt

1995 FORD ESCORT
140,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
TIJERINAL1
  • MEMBER
  • 1 POST
car belt is broke for the second time after it run about 4 miles ,I stopped the car and turn the engine key off, I heard thre puff of the belt, any ideas, alternator pulley spins,stering spins, the tentioner is new, a/c is loose, the motor does not move, but if I turn the engine the car moves....???
Dec 3, 2010 at 12:40 PM
Advertisement
Avatar
CJ MEDEVAC
  • Experienced Mechanic
  • 11,004 POSTS
You say all accessories turn freely?

How 'bout the A/C?--sure the pulley will turn freely if the A/C if in the "OFF" Mode, cause its not engaged with the compressor....BUUUUT!!!!

If you have your A/C "ON" or your heat is in "DEFROST MODE"-----The pulley will actually turn the compressor--not just FREEWHEEL!

2 ways to check it w/ it on your rig

1) Put the belt on--Start your car and turn on the A/C---Does the center part of the pulley turn with the outer part (it should)

2) ENGINE OFF!!!--see if you can turn the inner part of your pulley with your fingers...if you cannot budge it, your compressor may be locked up

If you are in a bind and everything spins freely car off (with the exception of the inner part of A/C pulley)----Disconnect the A/C compressor wire at/ near the A/C Pulley---NOW IT CANNOT COME ON AT ALL! (THE CLUTCH WILL NOT ENGAGE TO THE COMPRESSOR)--A/C will not work and the Defrost will work, but NOT to max efficiency ('COARSE IF IT IS LOCKED UP, IT WOULD NOT WORK ANYWAY!)

THIS MAY GET YOU AROUND TILL YOU GET IT REPLACED OR HOT WEATHER COMES UP!

Let me know if that was it!

The Medic

Dec 3, 2010 at 7:32 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.