car wont start

1995 EAGLE VISION

6 CYL • FWD • AUTOMATIC

DBSTEW10

MEMBER
5 POSTS
FOLLOW

Need to change the fuel pressure regulator on my 95 Eagle Vision Tsi...ran through flood water and can't get the car to start, been 2 wks,,,keeps flooding

Mar 21, 2011 at 9:59 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

RASMATAZ

AUTOMOTIVE REPAIR CONTRIBUTOR
75,992 POSTS

NOTE: Tag injector electrical connectors for proper cylinder identification.

NOTE: Fuel system pressure must be released prior to any service of fuel injection components.
REMOVAL
Disconnect negative battery cable, and remove fuel tank cap.
Bleed off fuel pressure.
Remove regulator vacuum supply hose.
Fuel Pressure Regulator 3.3L
Remove regulator hold down clamp screw.
Fuel Pressure Regulator Removal
Using a thin flat screwdriver, pry regulator out of fuel rail. (do not use excessive force).
Fig. 25 Fuel Pressure Regulator-Typical
Remove O-rings from regulator.

Images (Click to enlarge)

Mar 21, 2011 at 10:06 AM