SPONSORED LINKS

95 crysler newyorker

Tiny
JOHN COYES
  • MEMBER
  • 1995 CHRYSLER NEW YORKER
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 220 MILES
Thanks for the email back I thought it might be my trans there is no light on and I also have a problem with my blow motor the fan does not come on and the dig control goes off and on it self I turned the fan to high well driving and the engine started to cut out could this be the problem an elec short that would cause the engine to cut out and hesitate while steping on the gas.
SPONSORED LINKS
Saturday, November 13th, 2010 AT 7:35 PM

2 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
If your responding to a previous answer you need to post at that original question.
Was this
answer
helpful?
Yes
No
Saturday, November 13th, 2010 AT 8:12 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
These rotors are bolted from the rear of the hub which is pressed in. They are very difficult to change and requires using a press after removing the whole knuckle.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, November 13th, 2010 AT 8:17 PM

Please login or register to post a reply.

Related Engine Hesitate Content

Vacuum Leak Test and Repair
VIDEO
Vacuum Leak Test and Repair
Instructional repair video
Hesitation
GUIDE
Hesitation
An engine hesitation is an interruption of continuous power during acceleration. When a engine is hesitating it will cause the car to lunge or surge which will cause a...
VIEW MORE

Sponsored links