1995 Chevrolet Van Front Left Brake Caliper Sticking Getting Very Hot Replaced

1995 CHEVROLET VAN
140,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
Front left brake caliper is sticking and getting very hot. I have replaced the caliper but still have the problem. It was suggested that the next thing to try is replacing the rubber supply line for that caliper.
Nov 15, 2012 at 2:51 AM
Advertisement
Avatar
IMPALASS
  • ✓ASE Certified Mechanic
  • 3,112 POSTS
  • ASE Certified Mechanic
Yes the internal part of the hose may have collapsed. When you apply break pressure the fluid expands the collapsed hose. When you let off the brake, the fluid can’t move back due to the collapsed line. I would check that.
Nov 15, 2012 at 2:58 AM
Avatar
CARADIODOC
  • ✓ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
Next time it doesn't release, loosen the steel lines at the master cylinder to see if it releases. We really hope it does not. Loosen the steel line where it connects to the rubber flex hose. If it does not release there, either the hose has a restriction or the new caliper is sticking. Open the bleeder screw on the caliper. If it releases, replace the hose.
Nov 15, 2012 at 3:00 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.