why is my truck idling so high

220,000 MILES
Avatar
EDAVIS2012
  • MEMBER
  • 3 POSTS
It is at 1500 rpm after the replacement of egr valve, iac connector and valve also the throttle position sensor when I turn the truck on it idles below 1k rpm for about 10 seconds then the rpms increase to 1500 rpm and thats where it remains once the engine heats up
Jan 10, 2012 at 6:57 AM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Try cleaning the IACV/TB and check the TPS closed and WOT voltages-start here
Jan 10, 2012 at 7:06 AM
Avatar
DOCFIXIT
  • ✓Experienced Mechanic
  • 18,828 POSTS
Maybe vacuum leak was throttle plate cleaned? was high idle problem before parts replacement? check engine light on? do you have acess to a scanner?
Jan 10, 2012 at 7:07 AM
Avatar
EDAVIS2012
  • MEMBER
  • 3 POSTS
I check for leaks with carb cleaner and listened for changes in idle speed , nothing, my check engine light only comes on when the truck is in gear at a stop. I thought it might be my tps so I tested and replaced it. I have left my battery unplugged for a half hour to reset the ecm after I replaced my egr valve, iacv and connector and tps.
Jan 10, 2012 at 7:22 AM
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
It probably has to relearn the idle speed due to battery disconnection-scan the computer for code/s
Jan 10, 2012 at 2:02 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle