SPONSORED LINKS

One screw in fuel pressure regulator. Truck will not start after back together

Tiny
MMTHOENE
  • MEMBER
  • 1995 CHEVROLET S-10
  • 150,000 MILES
Replaced fuel pressure regulator on a 4.3 v6 vortec 95 chevy s10. When doing so the top piece(where top screw goes) on boss mount broke. The regulator is still secured in mount with bottom screw. Orface in right spot. Put truck back together now no start. Lots of fuel smell?Is the regulator the problem. Even though it is secure and doesn't move
SPONSORED LINKS
Wednesday, September 19th, 2012 AT 10:45 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check your fuel pressure that will tell you is it vacuum or mechanical, if it'smechanical good chance it's no good from being broken
Was this
answer
helpful?
Yes
No
Wednesday, September 19th, 2012 AT 10:58 PM
Tiny
MMTHOENE
  • MEMBER
  • 1 POST
I can only do that with the machine you rent from auto store yes. Or?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 19th, 2012 AT 11:02 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Unless you have on eat home yes you'll have to rent it
Was this
answer
helpful?
Yes
No
Wednesday, September 19th, 2012 AT 11:03 PM

Please login or register to post a reply.

Related Fuel Pressure Regulator Replace/Remove Content

VIEW MORE

Sponsored links