How do you replace the mirror?
Mar 15, 2011 at 11:00 AM
drivers side mirror
1995 CHEVROLET CORSICA
SBLOOMERS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
1. Remove the door trim panel.
2.Remove the upper trim panel.
3.Remove the sound absorber.
4. Remove the three nuts.
5. Remove the control cable from the upper trim panel.
6. Remove the filler and mirror.
To install.
7. place the filler over the studs on the mirror.
8. iNSTALL THE CONTROL CABLE THROughthe filler and connect to the upper trim panel.
9. Install the 3 retaining nuts and tighten to 42--47 inch lbs.
10. Install the sound absorber, upper trim panel and trim panel.
2.Remove the upper trim panel.
3.Remove the sound absorber.
4. Remove the three nuts.
5. Remove the control cable from the upper trim panel.
6. Remove the filler and mirror.
To install.
7. place the filler over the studs on the mirror.
8. iNSTALL THE CONTROL CABLE THROughthe filler and connect to the upper trim panel.
9. Install the 3 retaining nuts and tighten to 42--47 inch lbs.
10. Install the sound absorber, upper trim panel and trim panel.
Mar 29, 2011 at 5:57 PM
Advertisement