MAF

130,000 MILES • V8 • 2WD • MANUAL
Avatar
OMAR198569
  • MEMBER
  • 12 POSTS
I have a 95 V8 Chevy Camaro and i'm having trouble with the MAF sensor. I replaced the MAF sensor because of a trouble code. Two days After replacing the MAF sensor the check engine light came on again and again it was a MAF sensor trouble code So i repalced it again and the light went away. The following day the check engine light came on again and again a MAF sensor trouble code. I was wondering what could be causing the MAF sensor to fail so fast.
Jun 30, 2011 at 4:30 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
check for an air leak between the MAF and the throttle body in the duct work. If there is a hole in the duct it may set the MAF code. Also check for vacuum leaks and clean the throttle body plate and IAC on both sides.
Jun 30, 2011 at 4:52 PM
Avatar
OMAR198569
  • MEMBER
  • 12 POSTS
I did not find any air leaks or vacuum leaks. I have also cleaned the throttle body plate and IAC and the check engine light still comes on.
Jun 30, 2011 at 6:17 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
yes but did you check the duct work for holes and cracks betweent ththrottle body and MAF
Jun 30, 2011 at 6:19 PM
Avatar
OMAR198569
  • MEMBER
  • 12 POSTS
yes I did.
Jun 30, 2011 at 6:53 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
then check for a bad connection at or near the maf and the pcm. make sure the pcm is getting signals both ways .
Jul 1, 2011 at 5:43 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle