SPONSORED LINKS

1995 Chevy Beretta need to rebuild the brake Master cylinder

Tiny
2CP-ARCHIVES
  • MEMBER
  • 1995 CHEVROLET BERETTA
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 88,000 MILES
1995 Chevy Beretta mileage: 88,000. I need to rebuild the brake master cylinder. The car has anti lock brakes and the Haynes manual says I need to take the car to a service center to bleed the brakes since special tools are required. I was wondering what are these special tools? I have access to an air-operated bleeder if that is what is required. Please help on this, I am capable of the rebuild but want to make sure that I will be able to bleed the brakes after the job is done.
SPONSORED LINKS
Monday, November 8th, 2010 AT 11:45 PM

1 Reply

Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
An air operated power brake bleeder is the proper tool used to bleed the brake system in your car. When rebuilding the master cylinder and before reinstalling on the car, bench-bleed the master cylinder to remove as much air as possible. This will make bleeding the system later a lot easier.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 8th, 2010 AT 11:47 PM

Please login or register to post a reply.

Related Brake Master Cylinder Bleed Content

Brake Master Cylinder Replacement
GUIDE
Brake Master Cylinder Replacement
The brake master cylinder is the most important part of the brake system and is used to pressurize the hydraulic brake caliper and wheel cylinders which apply pressure to...
VIEW MORE

Sponsored links