SPONSORED LINKS

Brake problems with 95 GM

Tiny
KENDON11
  • MEMBER
  • 1995 BUICK SKYLARK
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 140,000 MILES
Trouble bleeding brakes on 95 skylark after hard stop. Brakes went spongy. One bleeder on MC won't bleed right and front left and rear right won't bleed(just dribbles). ABS light does not stay on. Cannot find any leaks anywhere.
Wednesday, January 5th, 2011 AT 10:52 PM

3 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
That is likely a cross bleed system so that tends to point to a master cylinder problem, assuming no external leaks anywhere.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Wednesday, January 5th, 2011 AT 11:07 PM
Tiny
KENDON11
  • MEMBER
  • 2 POSTS
Is it possible to replace/rebuild this master cylinder without the tool to release the gear tension in the abs modulator?
Was this
answer
helpful?
Yes
No
Thursday, January 6th, 2011 AT 1:12 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Not something I'd recommend without a scan tool to synchronize them. It can be done but you have to know what your doing. The gears are going to go "boing" when you unbolt it.
Was this
answer
helpful?
Yes
No
Thursday, January 6th, 2011 AT 1:15 AM

Please login or register to post a reply.

Related Brake Stuck On Content

VIEW MORE

Sponsored links