3.8L engine how to r&r a/c compressor clutch bearing
Sep 23, 2012 at 6:05 AM
1995 Buick Regal R R C Compressor Clutch Bearing
1995 BUICK REGAL
GLENNDION
- MEMBER
- 2 POSTS
Advertisement
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
Book procedures requires the compressor to be removed, meaning the freon has to be discharged but if you are able to get the required space in engine compartment, you might not need to discharge.
After removal of the drive belt, disconnect the clutch wire, remove center bolt and clutch plate.
Remove snap ring you can take the pulley assy out to replace the bearing.
After removal of the drive belt, disconnect the clutch wire, remove center bolt and clutch plate.
Remove snap ring you can take the pulley assy out to replace the bearing.
Sep 23, 2012 at 9:03 AM
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
Refer to diagram
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Sep 23, 2012 at 9:04 AM
job all done . didn't have to remove compressor .
thank's glenn
Sep 23, 2012 at 10:21 PM
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
You're welcome.
Sep 23, 2012 at 10:34 PM
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
You're welcome
Sep 23, 2012 at 10:35 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.