SPONSORED LINKS

BMW clutch

Tiny
MICHAELVINCETT
  • MEMBER
  • 1995 BMW 525I
  • 6 CYL
  • 2WD
  • MANUAL
  • 197,000 MILES
Where is the clutch slave cylinder on a 1995 bmw 525i manual? The clutch is going to the floor and im pretty sure I have to bleed the system
Monday, January 24th, 2011 AT 8:19 PM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
The slave cylinder is mounted to the left-hand (driver's) side of the transmission.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Monday, January 24th, 2011 AT 8:25 PM
Tiny
DOCHAGERTY
  • MECHANIC
  • 9,601 POSTS
Michael, you might also have a failure in the clutch hydraulic system. A visual inspection of the master and the slave cylinders should be performed and if fluid is present as leakage, it might indicate the need to replace one or both of the cylinders. Let me know what you find out, if needed, I can assist you in sourcing the correct parts.
Was this
answer
helpful?
Yes
No
+1
Monday, January 24th, 2011 AT 10:54 PM

Please login or register to post a reply.

Related Transmission Clutch Slave Cylinder Content

Throwout Bearing - Secondary Cylinder Replacement
GUIDE
Throwout Bearing - Secondary Cylinder Replacement
A throwout bearing/secondary cylinder is used to apply force against the clutch pressure plate to release the clutch disc and should be replaced as part of the normal clutch...
VIEW MORE

Sponsored links