1994 Toyota Camry wheel

Tiny
IJAYKING1120
  • MEMBER
  • 1994 TOYOTA CAMRY
  • 2.2L
  • 6 CYL
  • RWD
  • AUTOMATIC
  • 194,000 MILES
The previous owner had scraped a rail on the driver side and the rim is slanted in. I had went to get an alignment thinking that was it but its still slanted. I changed the tie rod and the lower ball joint. Still the same. I checked to see if any metal was bent but couldnt find anything. Maybe im not looking right. It bothers seeing all wheels straight except the front driver side
Saturday, February 14th, 2015 AT 2:58 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It sounds like you have a bent lower control arm or strut. I would put the car on the hoist for inspection. Here is how to change the lower control arm out in case you find that it is the problem. Check out the images (below). Let us know how it goes
Images (Click to make bigger)
Thumb
Thumb
Was this
answer
helpful?
Yes
No
Saturday, February 14th, 2015 AT 3:51 PM

Please login or register to post a reply.

Related Tie Rod End Replace/Remove Content

Tie Rod End Replacement
GUIDE
Tie Rod End Replacement
EV's and gas power cars are equipped which tie rod ends which is needed to con­nect the rack and pin­ion or steer­ing box to the spin­dle and front wheels that con­trol the...
VIEW MORE