1994 Oldsmobile 88 sick old car

Tiny
RALPHROWE
  • MEMBER
  • 1994 OLDSMOBILE 88
  • 3.8L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 13,838 MILES
I put a code reader on the car and got these codes 321 no 18x ignition pulse im going to check crank position 2 marrow. 341 intermittent cam position sensor, I replaced that today.( No code). 361 est not toggling. 406 EGR pindle position error. Itook the EGR off and checked pindle and works fine, I do have an extra one though. 705 PRNDL switch failure. And 740 torque converter clutch failure is the clutch solenoid an internal part. Also I took the engine out of a royal column snifter model and put it in a counsel shift car 88 royal LS, , it seems like the snifter cable is to long, when in drive shifter is located 3rd gear position, I cant get to 2nd and 1st because snifter is in 1st position when in drive. I go by the led display on the counsel to see ware is drive. Im a electrician not a ace mechanic, but I do my own work when possible.
I tried adjusting cable at trans but didn't work. Are there 2 different length shift cables? Thank for you opinion and help.
PS this is a very helpful site.
Saturday, February 22nd, 2014 AT 8:43 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
See if you can find a cable out of a floor shift model that is probably one of your problems. The prndl problem may be a neuetral safety switch. The torque converter switch is inside trans on valve body.
Was this
answer
helpful?
Yes
No
Sunday, February 23rd, 2014 AT 8:10 AM
Tiny
RALPHROWE
  • MEMBER
  • 2 POSTS
Thanks for your info. What does code 361 est not toggling mean?
Was this
answer
helpful?
Yes
No
-1
Sunday, February 23rd, 2014 AT 9:05 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
There is no code 361you must have read scanner wrong.
Was this
answer
helpful?
Yes
No
Sunday, February 23rd, 2014 AT 10:15 AM

Please login or register to post a reply.

Sponsored links