tranny pulls

1994 NISSAN MAXIMA
18,000 MILES
Avatar
MAXIMA94
  • MEMBER
  • 3 POSTS
i just got my tranny rebuild but it's pulling when changing gears it doesn't do it all the time. What could be cuasing it. tranny #RE4FO4V, nissan maxima se 1994
Sep 27, 2011 at 4:07 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
a lot of the times when the trans is removed from the car, it disturbs the frams setting and requires an alignment when the job gets completed.

return to the shop and have them align the car for you

Roy
Sep 27, 2011 at 4:25 AM
Avatar
RACEFAN966
  • CERTIFIED EXPERT
  • 5,029 POSTS
It could be a tire or wheel bearing or? What you are experiencing is called torque steer so I would ask the trans shop to check pressures and make sure all it adjusted correctly.
Sep 27, 2011 at 4:26 AM
Advertisement
Avatar
MAXIMA94
  • MEMBER
  • 3 POSTS
Im not talking abt the car pulling to the side it's the tranny itself when changing gears (overdrive) it like hits something inside.
Sep 27, 2011 at 12:01 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
ok, sorry. you must have a warranty so take it back and have them repair this issue before it causes more issues and eventual failure. it may be the converter itself or the clutches.

Roy
Sep 27, 2011 at 2:18 PM
Avatar
MAXIMA94
  • MEMBER
  • 3 POSTS
Thank you. John A.
Sep 27, 2011 at 11:33 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
good luck
Sep 27, 2011 at 11:40 PM